FAQs

Our Address is definitely 27 Oxleigh Drive Malaga. Click here for the Google Map.

Office/Showroom Mon-Fri 8.00 – 16.30

Warehouse/Deliveries Mon-Fri 8.00 – 16.00

Stainless Steel fabrication takes approximately 4 weeks.

Yes, all our drains have been watermarked approved for all brands we supply.

Yes, the Stormtech and Ultimate ranges are manufactured in Australia.

Stainless Steel is available in 304 grade or 316 grade. Bathroom finish or Commercial finishes (outdoor) are both available. We recommend electropolishing to help prevent tea staining occurring on the grate. Areas of concern is coastal and river areas and swimming pool environment as an example.

Remember Its “Stainless Not Stain Free”.

Yes, there are interchangeable spacer tabs from 2mm- 10mm available or batten/joist holders available that simply click in the top of the pedestal.

Buzon pedestals are capable of supporting up to 1,000kgs.

Heights available from 17mm to 1,070mm.

Halgan Grease traps can only be purchased through Plumbing merchants. However we are happy to forward CAD drawings and install information to you to assist in your purchase decision.

In Western Australia the maximum height extension that can be supplied is 900mm.

The channel is available in constant depth, built in fall or stepped fall. Also shallow channel available at 60mm and 80mm deep.

All our 1 metre channel lengths come with a provision to needle drill out a 110mm knockout pipe that can then be siliconed into it (100mm DWV or 90mm stormwater).

No, this will compromise the strength of the channel and cause it to break up.

  • Standard (3 brace) = 27.5 tonnes/m2
  • E/Duty (4 brace) = 37.5 tonnes/m2

Yes, Coldbuster kits are DIY and come complete with everything you need to do the job. Although an electrician is required to install the thermostat. No special tools are required. Online video available at: coldbusters.com.au

Coldbuster do have in-screed kits but the general tile, timber, carpet kits are all laid on top of the screed with the floor finish laid directly on-top.

What is the address of the Showroom?

Our Address is definitely 27 Oxleigh Drive Malaga. Click here for the Google Map.

What are your Opening Hours?

Office/Showroom Mon-Fri 8.00 – 16.30

Warehouse/Deliveries Mon-Fri 8.00 – 16.00

How long does fabrication take for a stainless steel channel grate?

Stainless Steel fabrication takes approximately 4 weeks.

Are your shower channels watermarked approved?

Yes, all our drains have been watermarked approved for all brands we supply.

Are your stainless steel shower channels made in Australia?

Yes, the Stormtech and Ultimate ranges are manufactured in Australia.

What grade Stainless Steel do you supply?

Stainless Steel is available in 304 grade or 316 grade. Bathroom finish or Commercial finishes (outdoor) are both available. We recommend electropolishing to help prevent tea staining occurring on the grate. Areas of concern is coastal and river areas and swimming pool environment as an example.

Remember Its “Stainless Not Stain Free”.

Can the Buzon pedestals be used for both decking and paving?

Yes, there are interchangeable spacer tabs from 2mm- 10mm available or batten/joist holders available that simply click in the top of the pedestal.

How much weight can the Buzon pedestals withstand?

Buzon pedestals are capable of supporting up to 1,000kgs.

What heights do the pedestals come in?

Heights available from 17mm to 1,070mm.

Can I purchase Halgan Grease traps through Civil and General Distributors?

Halgan Grease traps can only be purchased through Plumbing merchants. However we are happy to forward CAD drawings and install information to you to assist in your purchase decision.

What is the maximum extension that can be installed on a Halgan grease trap?

In Western Australia the maximum height extension that can be supplied is 900mm.

What are the dimensions of a MEA polymer concrete channel?

The channel is available in constant depth, built in fall or stepped fall. Also shallow channel available at 60mm and 80mm deep.

How do I connect pipes?

All our 1 metre channel lengths come with a provision to needle drill out a 110mm knockout pipe that can then be siliconed into it (100mm DWV or 90mm stormwater).

Can I cut a hole in the side of the channel?

No, this will compromise the strength of the channel and cause it to break up.

What are load ratings of Ausdrain Enviromodules Std + E/Duty

  • Standard (3 brace) = 27.5 tonnes/m2
  • E/Duty (4 brace) = 37.5 tonnes/m2

Can anyone install Coldbuster floor heating?

Yes, Coldbuster kits are DIY and come complete with everything you need to do the job. Although an electrician is required to install the thermostat. No special tools are required. Online video available at: coldbusters.com.au

Are the Coldbuster kits laid in screed?

Coldbuster do have in-screed kits but the general tile, timber, carpet kits are all laid on top of the screed with the floor finish laid directly on-top.